注文書は　　お問い合わせは

1 Corrosion Prevention and Protection: Practical Solutions \43,000
by Edward Ghali, Vedula S. Sastri, M Elboujdaini. 576 pages. 2007
腐食防止と保護: 実際的な解決
Corrosion Prevention and Protection: Practical Solutions presents a functional approach to the various forms of corrosion, such as uniform corrosion, pitting corrosion, crevice corrosion, galvanic corrosion, stress corrosion, hydrogen-induced damage, sulphide stress cracking, erosion-corrosion, and corrosion fatigue in various industrial environments. Introduction and Principles (Fundamentals) of Corrosion/Corrosion Testing, Detection, Monitoring and Failure Analysis/Regulations, Specifications and Safety/Materials: Metals, Alloys, Steels and Plastics/Corrosion Economics and Corrosion Management

1 Guidelines for Ballast Tank Coatings Systems and Surface Preparation. \13,760
by The Tanker s Structure Co-operative Forum. 122p. 2002
バラスト・タンクコーティングシステムと表面処理のためのガイドライン

2 Introduction to the High-Temperature Oxidation of Metals. 2nd edition. \18,560
by N. Birks. , G. H. Meier. & F. S. Pettit. 350p. 2006.
金属の高温の参加への序論
Contents; 1. Methods of investigation; 2. Thermodynamic fundamentals; 3. Mechanisms of oxidation; 4. Oxidation of pure metals; 5. Oxidation of alloys; 6. Oxidation by oxidants other than oxygen; 7. Reactions of metals in mixed environments; 8. Hot corrosion; 9. Erosion-corrosion of metals in oxidizing atmospheres; 10. Protective coatings; 11. Atmosphere control for the protection of metals during production processes; Appendix A. Solution to Fick's second law for a semi-infinite solid; Appendix B. Rigorous derivation of the kinetics of internal oxidation; Appendix C. Effects of impurities on oxide defect structures.

3 Corrosion Control Through Organic Coatings. by A. Forsgren. 184p. 2006. \19,000
有機的なコーティングによる腐食防止
Corrosion Control Through Organic Coatings provides comprehensive coverage of organic corrosion-protection paints. Combining corrosion expertise with paint formulation knowledge, the book explains the most important variables in selecting and applying anticorrosive coatings. It presents a review of anticorrosion pigments, additives, binders, and metal pretreatments such as blast cleaning. The author addresses important aspects of heavy-duty coatings such as coating composition, formulation, and substrate preparation. She also describes factors that contribute to coating breakdown, degradation, and failure and explores the acceleration of these factors in laboratory testing.

4 Simulation of Electrochemical Processes.（Electrocor 2005） \23,000
by C. A. Brebbia. & V. G. Degiorgi. 245p. 2005.
電気化学のシミュレーション
This book contains most of the papers presented at the first International Conference on the Simulation of Electrochemical Processes held in Cadiz, Spain in May 2005. The meeting was organised by the Wessex Institute of Technology.
The motivation for the meeting was to bring together researchers who have made significant developments in the area of Electrochemical modelling over recent years. Electrochemical processes are used by engineers to protect structures against corrosion, to apply coatings and paints, and as a manufacturing process. However, until recently, Engineers had to use experimental testing or frequent surveys to ensure the adequacy of a design as sophisticated prediction models were not available. The papers presented at this conference demonstrate the major advances that have been made in computational modelling to enable the most complex processes to be simulated.

5 Coatings Formulation. by B. Muller. & U. Poth. 300p. 2006 \32,000
コーティング定式化
Part 1: Basics/ Pigment Dispersions ? Paint Formulation
Part 2: Solvent-Borne Paints/ Paints Forming Films at Ambient Temperature ? Stoving Enamels
Part 3: Water-Borne Paints /Solubility Respectively Dispersibility of Paint Resins in Water ? Ambient Temperature Drying/Curing Water-Borne Paints and Coatings/ Water-Borne Paints, Curing at Ambient Temperatures ? Water-Borne Stoving Enamels
Part 4: Solvent-Free Coatings/ Two Components Systems ? Radiation Curing ? Powder Coatings ? General Literature

6 Corrosion Handbook: Corrosive Agents and Their Interaction with Materials, Volume 5: \72,000
Carbonic Acid, Chiorine Dioxide, Seawater. by G. Kreysa & M. Schutze. 642p. 2006
腐食ハンドブック：腐食性のエージェントと材料とその相互作用　第５巻：炭酸、塩素二酸化物、海水
The DECHEMA Corrosion Handbook provides a comprehensive collection of knowledge which is unique both in scope as well as content. Corrosion data and the chemical resistance of all technically important metallic, non-metallic, inorganic and organic materials in contact with aggressive media are covered, constituting the prime information source worldwide for the selection of materials for equipment in which corrosive media are handled or processed. Furthermore, methods of corrosion protection and prevention are also described.
Faced with the task of optimizing a given environment-material system, the user of this work will find answers to the following questions: